Free Ground Shipping on Orders Over $250+

Benefits of the Thompson Duke ACF1 Automatic Vaporizer Filling Machine

Benefits of the MCF1 Semi-Automatic Thompson Duke Filling Machine

The American-made, patented, cETLus Certified, and GMP ready MCF1 Semi-Automatic Filling Machine is foot pedal operated and designed to fill any oil vaporizer device available on the market.


Fill every type of cartridge and POD as well as capsules, syringes and jars. Refill the glass 140ml heated oil reservoir during operation. Adjust the dispense volume precisely up to 1.1 ml. Custom adapters available for septum pierced devices.

Dispense High and Low Viscosity Oils

Automatic digital temperature control with patented heated oil dispense system regulates oil viscosity. Fill high viscosity oils with extreme accuracy, precision and repeatability. Fine tune dispense speed and force for lower viscosity oils

Rapid Oil Formula Changes and System Cleaning

Replace the food safe, laboratory grade, dispense system components in less than one minute to switch oil formulas. Rapidly clean the dispense components with less than one gram loss. Two full dispense component sets are included.

Patented and Certified

Patented and cETLus Certified for the USA and Canada (UL 61010-1, UL 61010-2, UL508, CSA C22.2, IEC 61010-1). Adheres to the rigorous Good Manufacturing Practice guidelines required for legal compliance.


Designed, manufactured, distributed and patented in the United States of America. Industrial control system with compliant materials and dispense components. Stainless steel check valves custom designed and manufactured
specifically for oil filling applications. Exceptional customer support available for the lifetime of the machine.


Lightweight and portable benchtop design for quick and easy setup, operation, and cleaning. Foot pedal operated dispense system. Requires 120V AC power and 40psi compressed air.

Why Thompson Duke filling machines?

With close to 10 years of expertise, we are well-versed in the intricacies of the complex cannabis and vape industry when it comes to starting or expanding a business. 

Focused on manufacturing high-quality, custom-branded and non-branded vape products including, vape packaging, oil vaporizer batteries, and vape cartridges, we can bring any business’ branding ideas to life.  

One of the paramount elements in our business approach is that we do not want to sell a machine to a client and not satisfy their performance expectations. Specifically for the ACF1 Automatic Vaporizer Cartridge Filling Machine, we need to contact the buyer and get an understanding about their oil and cartridges and get a solid idea on how the ACF1 will perform for them. If you can give us samples of the cartridges you offer to your clients, we can get a preliminary understanding how the ACF1 machine should perform with your carts, and make sure we have cartridge trays specifically designed to accommodate your carts.

When we close the ACF1 sale, the buyer sends us cartridges, or you can inform us about which ones they’ll be using. We’ll custom machine cartridge trays and guides for them if needed, setup the machine for their carts and run pre-operational tests. Then we ship it and travel to their location for startup and training. The buyer pays the costs for the startup and training services and travel expenses. Typically this will be about $2800.00 – $3500 US.

All of our machines are designed and manufactured in Portland, Oregon USA. We offer the first filling machines to successfully achieve Intertek’s ETL Certification program cETLus listing for the US and Canada

The ETL Mark is a recognized symbol of safety and proof of product compliance to North American safety standards. Authorities Having Jurisdiction (AHJs) and code officials across the US and Canada accept the ETL Listed Mark as proof of product compliance to published industry standards.

The ACF1 can accommodate nearly every type of cartridge form factor. For PODs the ACF1 can fill either one side or both sides of the POD if the oil can’t flow across the bottom of the POD. This design is forward compatible, so if there’s a device in the future that needs a custom array, you would enter the code of the tray through the touchscreen, and the array will automatically be setup in the ACF1 control program. The ACF1 machine is also certified by PAX for filling the ERA POD. It’s the only third party machine with an official PAX certification.

We have full material data sheets on our dispense (wetted) components and COC’s for GMP compliance. We’ve had a third party execute an independent lab test on the dispense system for the ACF1 and MCF1 for heavy metals and the results were negative (no heavy metals).

Another unique offering from Thompson Duke is that they offer an industrial data acquisition system that permanently captures and stores all variables in the ACF1 control system each time a cartridge is filled. It can connect to multiple ACF1 machines, so the data can be captured for the entire operation. Historical information is available for continuously display on a supervisor’s HMI screen. The historical reports will show throughput in carts per hour, per shift, day, week month – any time period, set points for temperature, draw time, dwell time, reservoir temperature, oil batch number, cart / POD array, successful fills, missed fills (if there’s a problem with a cart).


We’ll get back to you with a quote as quick as we can!

  • No products in the cart.